The IP6 Sport is a competition spec forwards only Brushed Speed Control designed specifically for use in RC cars.

The IP6 Sport has a 10 turn motor limit, what this means is that you can use any, DC Brushed 540 size motor, as long as the number of turns on that motor are equal to or higher than 10.

The IP6 Sport is the perfect speed controller for anybody wanting to make the step up to competition racing at club or regional level.

The IP6 Sport is a very sophisticated Speed Controller that allows you to adjust many different parameters to achieve the best possible profile for both the driver and the track conditions. Adjustable parameters include, Drive frequency, Throttle curve, Acceleration rate, Initial brake power and adjustable on/off drag brakes. Being able to adjust all these different parameters independantly gives you a huge amount of fine tuning that enables you to gain the perfect set up for each track you go to!

The development of the IP6 Sport was helped greatly by the Mtroniks Team drivers who continue to aid us in improving our top end Speed Controllers each year.

A break down of the IP6 Sports features can be seen below.

• 100% Waterproof
• 10 turn motor limit
• 4 to 7 cells operating voltage (1.2VDC/cell)
• Selectable drive frequency from 1.5KHz to 11.0KHz
• Selectable throttle curves
• Selectable acceleration rates
• Selectable initial brake power
• Selectable drag brakes - on/off
• 5.6V /4.0Amp BEC (0.08V drop out @ 6A)
• Maximum current rating, 1500Amps
• Continuous current rating, 500Amps
• Dimensions : L33.0mm x W25.0mm x H15.0mm
• Weight : 20.0g