MicroViper MicroViper R
Click image above to enlarge
The MicroViper R is a miniature Brushed Speed Controller designed specifically for use in 1/18 or 1/28 scale RC cars.
The MicroViper R has a very small footprint measuring just under 26.0mm square, making it seem even smaller is the fact that is only an incredible 9.0mm high!!
The MicroViper R is very powerful for it's small size, it has been designed to run with motors up to 380 size, making it a perfect alternative or upgrade for any 1/18 or 1/28 scale RC car! It has no 380 motor limit meaning you can use any 380 motor you want and not worry about it! The MicroViper R, like it's bigger brothers in the Viper range, is packed full of features, including motor short protection, motor stall protection, adjustable brakes, adjustable reverse including reverse disable, built in failsafe and is also 100% waterproof.
MicroViper R specification
- No motor limit (380 can size)
- Motor short protection
- Forwards, brake & reverse
- 3.3KHz drive frequency
- Adjustable reverse (incl. Disable)
- Adjustable brakes
- 4.8V - 12.0V input voltage
- 1.2A BEC
- Built in failsafe
- 26.0mm x 25.6mm x 9.0mm
- 100% Waterproof
- Weight - 23.0g
The MicroViper R comes with standard battery and motor connections fitted so it is easy to fit straight into any RC car install.
| MicroViper R Instruction Manual Full set of set up instructions for the MicroViper Brushed Speed Control |
Download now >>
|
| test test |
Download now >>
|
