Viper Marine20
Click image above to enlarge
The Viper Marine20 is a Brushed Speed Control designed specifically for use in RC boats.
The Marine20 has a 20Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 20Amps under load (with the prop connected, under water).
The Marine20 and is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 20Amp limit reversible electronic Speed Control or for anybody who uses scale model RC boats at scale speeds.
The Marine20 is the big brother to the Marine15 from the Viper range of Speed Controls suited to RC model boats, which means it has all the same features as that of the Marine15 and other more expensive Speed Controls! Features such as adjustable reverse functions and a built in failsafe are standard on this Speed Control and the motor stall protection is a feature which cannot be overlooked when a possible encouter with weeds is always a possibility.
A break down of the Viper Marine20 specification can be seen below
- NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
- ABSOLUTE short circuit and motor overload protection
- 20Amp motor limit
- 1.2A BEC
- Dual core microprocessor
- 5 -10 cells input voltage (6.0-12.0V)
- Adjustable features include programmable reverse (including disable)
- 4 Layer super power circuit board
- Thermal integrated protection system
- Digital one touch set up
- Legendary 100% waterproof design
- Dimensions : L39.0mm x W34.0mm x H13.0mm
- Weight : 55g
| Viper Marine20 Instruction Manual Full set of set up instructions for the Viper Marine20 Brushed speed control |
Download now >>
|
