Viper SSR
Click image above to enlarge
The Viper SSR is a Brushed Speed Control designed specifically for use in any RC model that requires symmetrical throttle response such as an RC robot, tank or bow thruster in a tug boat.
The SSR has a 25Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 25Amps under load.
The SSR has all the same features the Viper Marine range of Brushed Speed Controls with the difference of having symmetrical throttle response about the neutral position. This gives you exactly the same throttle response, power, start up and control in both the forwards and reverse directions! Features such as adjustable reverse functions and a built in failsafe are also standard on the SSR and the motor stall protection is a feature which cannot be overlooked in any RC application!
A break down of the Viper SSR specification can be seen below
- NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
- ABSOLUTE short circuit and motor overload protection
- Symmetrical throttle response
- 25Amp motor limit
- 1.2A BEC
- Dual core microprocessor
- 5 -10 cells input voltage (6.0-12.0V)
- Adjustable features include programmable reverse (including disable)
- 4 Layer super power circuit board
- Thermal integrated protection system
- Digital one touch set up
- Legendary 100% waterproof design
- Dimensions : L39.0mm x W34.0mm x H13.0mm
- Weight : 55g
| Viper SSR Instruction Manual Full set of set up instructions for the Viper SSR Brushed speed control |
Download now >>
|
