Viper Sub8
Click image above to enlarge
The Viper Sub8 is a Brushed Speed Control designed specifically for use in RC submarines.
The Sub8 has a 40Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 40Amps under load (with the prop connected, under water).
The Sub8 is the perfect speed controller for anybody who is into RC submarines and wants a speed controller designed specifically for their hobby interests.
The Sub8 has all the same features as the Viper Marine range of Brushed Speed Controls with the added bonus of having an external BEC. The BEC fitted to the Sub speed controls is more powerful than that used on the standard Viper Marine range and is mounted on the external heatsink of the speed control. This allows you to tap into the regulated 5.0V for any of your models other features that might require a 5.0V supply! Features such as adjustable reverse functions and a built in failsafe are standard on Sub8 and the motor stall protection is a feature which cannot be overlooked when a possible encouter with weeds is always a possibility.
A break down of the Viper Sub8 specification can be seen below
- NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
- ABSOLUTE short circuit and motor overload protection
- 40Amp motor limit
- 1.5A BEC
- Dual core microprocessor
- 4 -8 cells input voltage (4.8-9.6V)
- Adjustable features include programmable reverse (including disable)
- 4 Layer super power circuit board
- Thermal integrated protection system
- Digital one touch set up
- Legendary 100% waterproof design
- Dimensions : L39.0mm x W34.0mm x H13.0mm
- Weight : 55g
| Viper Sub8 Instruction Manual Full set of set up instructions for the Viper Sub8 brushed speed control |
Download now >>
|
