Mtroniks P2 Brushless Motor

Click image above to enlarge

Code: P2 #.#T

---

Brushless, sensorless sintered magnet motor

---

£64.99

• Printer friendly version
• Email this page to a friend
• Write a review
• Enquire about this product
• Bookmark this page
• Report a problem

The P2 motor range is the second generation of sensorless, brushless motors specifically for use with RC cars to come from 5 years worth of R&D and experience with brushless motors and speed controls at Mtroniks. All the P2 motors are built using the highest quality parts and latest manufacturing techniques.

The P2 motors have been designed to give unbeatable performance when used with Mtroniks brushless speed controls but are also compatible with any good sensorless brushless speed control.

P2 features

• Military spec neodymium sintered magnets
• Standard 540 can size and weight
• User friendly solder tabs for easy and neat connection to the speed control
• Re-buildable design to help keep the motor clean and running at highest possible performance
• High performance, low friction ball bearings
• Hardened 3.17mm motor shaft to match all existing standard pinions
• Anodised solid can for better heat removal
• Full range of winds available

The following winds are available from the P2 range.

Part# P2 15.5T     15.5Turn (Stock spec for use in 1/10 off road and 1/10 TC)

Part# P2 10.5T     10.5Turn (19T spec for use in 1/10 off road and 1/10 TC)

Part# P2 6.5T         6.5Turn (For use in 1/10 off road and 1/10 TC)

Part# P2 5.5T         5.5Turn (For use in 1/10 off road and 1/10 TC)

Part# P2 4.5T         4.5Turn (For use in 1/10 off road and 1/10 TC)

Part# P2 3.5T         3.5Turn (For use in 1/10 TC)

Part# P2 2.5T         2.5Turn (For use in 1/10 TC)