Mtroniks G2 Pro combo - Speed control and Motor set
Click image above to enlarge
;)
;)
G2 Speed control and motor sets. The new standard in brushless performance and power!
The G2's complete re-design will show that brushless technology has just reached a new high!
The G2 Pro brushless speed control and motor set has been designed to use in 1/10 scale competition on and off road racing. It has been optimised to give the best possible performance and top speeds when used with high quality P2 brushless motors.
The new features and high performance components used to build the G2 is what makes the G2 Pro the most competitve speed control in its class today. When used with the matched P2 motor complete with the set you can expect to see unbelievable control and power. This completely new speed control set sets new levels is brushless speed-control technology.
The following versions of the G2Pro sets are available:
Part# MG2C155 G2Pro ESC w/15.5Turn (Stock spec for use in 1/10 on/off road)
Part# MG2C105 G2Pro ESC w/10.5Turn (19T spec for use in 1/10 on/off road)
Part# MG2C65 G2Pro ESC w/6.5Turn (For use in 1/10 on/off road)
Part# MG2C55 G2Pro ESC w/5.5Turn (For use in 1/10 on/off road)
Part# MG2C45 G2Pro ESC w/4.5Turn (For use in 1/10 on/off road)
Part# MG2C35 G2Pro ESC w/3.5Turn (For use in 1/10 TC only)
G2 Pro features
- Perfect sensorless drive
- New G2H - high performance heat dissipation power boards
- New G2 software increases power and top speeds
- 100% Waterproof
- Safety features including thermal cut off
- NiMH/NiCAD/LiPo Support
- Built in data logger (8 minutes maximum)*
- New adjustable features via included Mtroniks pit card - Very easy to use
- New high power brakes, fully adjustable
- New high power drag brakes, fully adjustable
- Reverse lock out
- Input voltage - 4.8 to11.1V
- Motor limit - On Road - 3.0T
- Motor limit - Off Road - 4.5T
- Small size - 42.0 x 27.0 x 23.0mm
- Weight - 66g (excluding wires)
P2 features
- Military spec neodymium sintered magnets
- Standard 540 can size and weight
- User friendly solder tabs for easy and neat connection to the speed control
- Re-buildable design to help keep the motor clean and running at highest possible performance
- High performance, low friction ball bearings
- Hardened 3.17mm motor shaft to match all existing standard pinions
- Anodised solid can for better heat removal
- Full range of winds available
G2 Procombo ................ You choose the chassis and we will provide the winning power system!
*Data logger requires a Windows PC and the optional Mtroniks pit software available seperately
