Mtroniks Mtroniks G2 Beast combo - 1/8 Speed control and motor set
Click image above to enlarge
;)
;)
;)
;)
;)
;)
G2 Speed control and motor sets. The new standard in brushless performance and power!
The G2's complete re-design will show that brushless technology has just reached a new high!
The G2 Beast 1/8 brushless speed control and motor set has been designed to use in 1/8 scale competition off road racing. It has been optimised to give the best possible performance and top speeds when used with high quality P2 brushless motors.
The new features and high performance components used to build the G2 is what makes the G2 Beast the most competitive speed control in its class today. When used with the matched P2 motor complete with the set you can expect to see unbelievable control and power. This completely new speed control set sets new levels is brushless speed-control technology.
The G2 Beast comes with a pre-drilled base to allow direct fixing to the metal chassis of your 1/8 rallycross buggy. This turns the chassis of your buggy into a huge heatsink for the speed control! This means that no fans are required to keep the controller cool during a race! Add this to the fact that the controller is 100% waterproof and has no sensor inputs to go wrong in the wet and you have the perfect set up for running in all conditions! See pictures above of the G2 Beast combo being run in the pouring rain installed in the 1/8 H8E buggy courtesy of Dez Chand RRCi.
The following versions of the G2 Beast sets are available now:
Part# MG2B21 G2Beast ESC w/2100kv motor (Race spec and power)
G2 Beast features
- Perfect sensorless drive
- New G2H - high performance heat dissipation power boards
- New G2 software increases power and top speeds
- 100% Waterproof
- Safety features including thermal cut off
- NiMH/NiCAD/LiPo Support
- 1.5A BEC (only up to 9.6V input)
- Built in data logger (8 minutes maximum)*
- New adjustable features via included Mtroniks pit card - Very easy to use
- New high power brakes, fully adjustable
- New high power drag brakes, fully adjustable
- Reverse lock out
- Input voltage - 7.2V to 14.8V
- Motor limit (2S) - 3000kv
- Motor limit (4S) - 2100kv
- Small size - 50.0 x 27.0 x 23.0mm
- Weight - 70g (excluding wires)
P2 features
- Military spec neodymium sintered magnets
- Standard 600 can size and weight
- User friendly solder wires for easy and neat connection to the speed control
- High performance, low friction ball bearings
- Hardened 5.0mm motor shaft to match all existing standard pinions
- Anodised solid can for better heat removal
G2 Beast combo ................ You choose the chassis and we will provide the winning power system!
*Data logger requires a Windows PC and the optional Mtroniks pit software available seperately
