The future of speed control is here

Mtroniks Viper Loco10 HV

loco10hv
  • £40.99
  • Easy one touch set up
  • Programmable
  • 12 to 24V  Operation
  • 10A Brushed motor limit

24V RC Locomotive speed controller. Full description

  • Description
  • Delivery and Returns
Description

The Viper Loco10 HV is a new brushed speed controller designed specifically for use in RC Locos with a battery voltage of between 12.0V and 24.0V. The installation, set up and operation of the new HV Viper range has been designed to be exactly the same as the original Viper range which we have been 'warned' never to change!!

An exciting feature of the new 24V HV Viper range is addition of Lipo battery pack compatibility as well as the usual NiCAD/NiMH/Lead Acid and Gel cells that are more commonly used.

It has a 10Amp motor limit, what this means is that you can use any, DC brushed motor, as long as the current drawn by that motor does not exceed 10Amps under load (pulling a full load).

The Viper Loco10 HV controller also feature the new 4 quadrant control system that stops the motor completely before turning it in the opposite direction. This allows for perfectly symmetrical operation about the neutral position in both directions, allowing the modeller to achieve perfect slow control in all situations.

Other features of the Viper Loco10 HV controller are the ability to turn reverse on or off. This is done easily by a single press of the set button, allowing you to use the controller in forwards and reverse or forwards only mode and a more powerful BEC, at 2.0Amps the BEC will allow the running of more extras direct from the receiver.

This new HV version of the already popular 'microLoco10' is sure to become a popular choice with model Loco enthusiasts and is one that we have spent a lot of time thinking about. It comes with features included, such as a built in cruise control, 100% proportional, fine throttle control in both directions, and motor stall protection. Not to forget that the new Viper Loco10 HV is completely, 100% waterproof and designed to work on fully charged 24V Lead Acid batteries or a fully charged 6S Lipo pack.

For matching motor wires see http://www.mtroniks.net/prod/RC-Accessories/WBULCON30MO.htm 

Downloads

Technical Specification

Product Type Speed Controller Only
Motor Type Brushed
Direction Programmable
Current Limit 10 Amps
Battery Type NiCAD/NiMH/Lead Acid/LiPo
Lipo safe Yes
Operating Voltage 12.0Volts to 24.0Volts
Set up Push button
BEC 2.0A
Motor Short circuit protection Yes
Thermal overload protection Yes
Failsafe Cruise Control
Dimensions L60.0mm x W37.0mm x H13.0mm
Weight 75.0g
Delivery & Returns

Delivery

If the item is in stock we aim to despatch all orders within two working days (Monday to Friday). If any item is not in stock, please allow up to 14 days for delivery. For special order items, please allow 21 days delivery.


All goods sent within the UK are sent by Royal Mail or UPS and we aim for delivery within 3 working days. Overseas delivery may take a little longer and may be subject to delay in customs. Deliveries may be subject to import duties and taxes and the burden lies with the purchases to satisfy charges subsequently incurred.

Returns & Exchange Policy

At Mtroniks we want you to be totally happy with everything you purchase from us. If you have a problem it is very helpful to us if you Indicate what the problem is and whether you require us to take a look at it for you. We cannot refund to you if you do not have your purchase details!

If any of your items are faulty please let us know immediately on 01943 461482 or by emailing to enquiries@mtroniks.net and return them straight to us at the address below and we will exchange it for you as quickly as possible.

Please send your returns to:
Mtroniks Ltd.
41A Ilkley Road
Otley
West Yorkshire
LS21 3LP
UK

Close

1 item(s) added to your compare list